01 · CONTROL CABINETS · SMOKE CONTROL
ANHEL® control cabinets for smoke-control ventilation
Control of smoke-extraction fans, dampers and air-pressurisation systems. Automatic transfer to smoke-extraction mode on the Fire signal. FZ-123 fire-safety certification, IP54+, distinctive red enclosure.
02 · Technical specifications
Series parameters
Reference characteristics. The final configuration is sized to the project brief.
Power supply
1 / 2 inputs with built-in ATSSupply voltage
1×220 / 3×380VIngress protection
IP54 (opt. up to IP69)Climate rating
UKhL4 (opt. UKhL1, UKhL2)Enclosure
red (fire-rated)Certification
FZ-123 (fire safety)Damper control
supportedControl type
local / remote
03 · DESCRIPTION
Purpose and operating principle
The ANHEL® smoke-control cabinet is armed by the Fire signal, automatically starts the smoke-extraction and pressurisation fans, opens the fire dampers and monitors the integrity of the system as a whole. It supports any smoke-control topology — from single-storey to multi-zone schemes.
It diagnoses incoming control wiring for open circuits and short circuits, checks motor windings, and transfers to the backup supply on a power fault. For protected-zone occupancy of people with reduced mobility, heater control is an option. The build supports operation in extreme smoke and high-temperature conditions.
04 · APPLICATIONS
Where it is deployed
Buildings of any type with a mandatory smoke-control system.
Commercial property
Offices, shopping centres, hotels, mixed-use buildings
Residential complexes
High-rise housing, car parks, stair shafts
Industrial sites
Production shops and warehouses with fire-hazard category
PRM safety zones
Refuge areas for people with reduced mobility, with heater control
Underground structures
Tunnels, basement parking, technical floors
Public buildings
Schools, kindergartens, hospitals — high-occupancy facilities
06 · ADVANTAGES
Why ANHEL®
Fire-safety certification, high ingress protection and line-integrity diagnostics.
FZ-123 fire-safety certification
Verified operability as part of fire-protection systems — tested for resistance to high temperature and smoke.
IP54+ ingress protection
IP54 as standard with optional IP69 — for harsh service environments.
Line and winding monitoring
Open-circuit and short-circuit diagnostics on the input wiring, motor-winding check — fault detection before failure.
Local and automatic modes
Mode selection for testing and maintenance. Automatic transfer to smoke-extraction mode on the Fire signal.
Supply redundancy and ATS
One or two inputs with built-in ATS; backup UPS feeds.
Compliance with PB, SP and GOST
Installation and operation to Russian fire-safety codes; red enclosure as the standard fire-rated marking.
07 · GALLERY
From the factory floor
Photos will be published after retouching of the factory shots.
08 · PROJECTS
Already in use at
10 · DOCUMENTATION
Documents and specification sheet
Specification sheet — PDF for design and acceptance, or online form with autosave.