01 · ENGINEERED EQUIPMENT · WATER TREATMENT
ANHEL Water Treatment Series
Water treatment units up to 56 m³/h for multi-unit residential buildings and complexes — both new builds and retrofits. Multi-stage mechanical filtration and ultraviolet disinfection. Four modifications by filtration lines — matched to the building's flow rate.
Photo shows the 2-line modification as an example. The actual configuration depends on the series model.
02 · QUICK QUOTE
PDF quote by email in 30 seconds
Enter the required flow rate — we'll match a modification and generate a commercial proposal in PDF.
0 — 55.9 m³/h
Enter the flow — the modification will be matched automatically
02 · Technical specifications
Series parameters
Reference characteristics. The final configuration is sized to the project brief.
Working pressure
up to 6barInlet water temperature
up to +60°CRoom air temperature
+5 to +30°CRelative humidity
≤ 75%Climate class
У4 per ГОСТ 15150-69UV dose
≥ 40mJ/cm²Warranty
24monthsService life
20years
03 · PURPOSE
Purified potable water in line with СанПиН requirements
The ANHEL Water Treatment Series is built primarily for water treatment in multi-unit residential buildings and complexes — both new builds and retrofits. The unit sits in the building's plant room upstream of the pressure-boosting pump station and brings central drinking-water supply up to the level required by СанПиН 2.1.4.1074-01 (Drinking water. Hygienic requirements for water quality of centralised drinking water supply systems. Quality control).
Beyond residential, the series serves business centres, medical and public institutions, and production facilities with technological-water quality requirements. The unit must be installed in an enclosed heated room upstream of the pressure-boosting pump station in the building's water supply system.
04 · APPLICATION
Where the series fits
Primary application — multi-unit residential buildings and complexes. Also used at other sites with СанПиН 2.1.4.1074-01 requirements.
Multi-unit residential
Both new builds and retrofits — the primary use case
Business centres
Office buildings, multifunctional complexes
Medical institutions
Hospitals, clinics, rehabilitation centres
Public institutions
Schools, kindergartens, training centres
Upstream of pressure-boosting pumps
Water preparation for PBS at residential and commercial sites
Production facilities
Technological water with cleanliness requirements
05 · MODEL RANGE
Four modifications by filtration lines
Series throughput scales with the number of parallel lines — the working principle is the same across all models.
UV lamps
2 шт.
Тип 2
Maximum flow
up to 21.9 m³/h
Dimensions H × W × D, mm
1856 × 1136 × 2080
UV lamps
3 шт.
Тип 3
Maximum flow
22.0 to 35.9 m³/h
Dimensions H × W × D, mm
1900 × 1956 × 3139
UV lamps
4 шт.
Тип 4
Maximum flow
36.0 to 45.9 m³/h
Dimensions H × W × D, mm
~ 1856 × 1800 × 3075
UV lamps
5 шт.
Тип 5
Maximum flow
46.0 to 55.9 m³/h
Dimensions H × W × D, mm
1856 × 1800 × 5565
Installed power and weight depend on the modification and are confirmed during sizing. The questionnaire covers every parameter required to pick a model.
DWG drawings · Yandex Disk06 · WORKING PRINCIPLE
Four stages of purification
Multi-stage processing — water passes sequentially through mechanical filtration and UV sterilisation.
Disc filter
Coarse mechanical filtration at 130 µm. Captures large suspended particles. Manual flushing.
Bag filtration
Two fine-filtration stages: 25 µm + 5 µm. Captures mechanical and colloidal particles. Differential-pressure monitoring; cartridges replaced when ΔP > 1 bar.
UV sterilisation
Quartz amalgam UV lamp. UV dose at least 40 mJ/cm². Lamp service life — 8800 hours / 1 year.
Control cabinet
Touchscreen HMI, automatic and manual modes, Modbus RTU dispatching, three access levels.
07 · UNIT COMPOSITION
What the unit includes
Factory skid assembly. The unit arrives on site ready for connection.
- Process piping kit on a common skid
- Disc filter (coarse filtration)
- Two-stage bag filters (25 µm + 5 µm)
- Ultraviolet steriliser (UV lamp)
- Control cabinet with touchscreen HMI
- Indicating pressure gauges
- Pressure transmitters (inlet and outlet)
- Shut-off and regulating valves
- Check valves
08 · MODES & AUTOMATION
Control and dispatching
Touchscreen HMI, access-level separation, Modbus RTU dispatching and a comprehensive protection set.
Operating modes
- Automatic — all UV lamps switch on/off simultaneously by a discrete Start/Stop signal
- Manual — each lamp is controlled individually from the operator panel
Interface and dispatching
- Touchscreen operator panel inside the control cabinet
- Three access levels: user / administrator / developer
- Logging: operational messages and a 24-hour archive
- Modbus RTU — transmits parameters (inlet/outlet pressure, differential, lamp states, common alarm)
Protections and interlocks
- Inlet and outlet pressure monitoring (protection at < 0.5 bar)
- UV-lamp overheating monitoring
- Open-circuit and short-circuit monitoring of pressure transmitters
09 · ADVANTAGES
Why the ANHEL Series
Model range to cover any flow rate, multi-stage purification and Russian manufacturing.
Model range for any building
Four modifications in the series — from a small multi-unit building to a full residential complex. Capacity 22-56 m³/h, selected by the facility's actual flow rate.
Multi-stage purification
Three levels of mechanical filtration (130 µm → 25 µm → 5 µm) plus UV disinfection with a dose of at least 40 mJ/cm².
Industrial automation
Touchscreen HMI in the control cabinet, Modbus RTU dispatching, three access levels: user / administrator / developer.
Factory skid assembly
Modular design — the unit arrives on site ready for connection. Piping, valves and the control cabinet are assembled and tested at the factory. Speeds up commissioning of new builds and simplifies plant-room retrofits in existing developments.
СанПиН 2.1.4.1074-01 compliance
Output water meets the requirements for drinking water of centralised systems. EAEU declaration of conformity № RU Д-RU.РA01.B.55819/21.
Manufactured in Russia
ANHEL® in-house assembly facility, engineering by Profit LLC, Saint Petersburg. 24-month warranty, 20-year service life.
10 · DOCUMENTATION
Documents and certificates
EAEU declaration of conformity and the questionnaire — shared with the broader ANHEL water treatment range.